| 1. | And the second order effects should also be mild
第二波的影响亦应该比较温和。 |
| 2. | Second order effect due to displacement
挠曲二阶效应13 |
| 3. | Comprehensive element stiffness matrix of two kinds of second order effects in frame column
框架柱两类二阶效应的综合单元刚度矩阵 |
| 4. | “ there is nothing wrong with doing something that benefits all humanity , but that is , in a sense , a second order effect
做一些有益于全人类的事情并没有错，但从某种意义上讲，那不是头等大事。 |
| 5. | We get the conclusion meanwhile , after considering the second order effect , the horizontal deflection of the frame becomes larger ; and affections of second order effect should be considered on the multi - storey and high build ing frame
结果还说明，考虑二阶效应后，框架的水平侧移增大，而对于多、高层框架，有必要考虑二阶效应的影响。 |
| 6. | Now the development in radio communication system and sensors productively need saw devices of high performance and high frequency . but electromagnetic interference of saw device is evident day and day . so the saw device technologies of the electromagnetic interference and electromagnetic compatibility in its process of design , fabrication and production must be considered . the demand request saw designer of second order effects which are not considered in low frequency
当前在无线通信系统和传感器方面的进展预示了需要高性能、高频的saw器件，但是随着其工作频率的提高， saw器件电磁干扰问题日益突出，因此saw其电磁兼容技术在设计、研制和生产过程中是必须考虑的。 |
| 7. | Before now because operating frequency was low , suppose that electrode in saw device has no thickness and thus second order effects are ignored . these second order effects , including electromagnetic feedthrough , triple transit interference , body acoustic wave , reflection and so on , affect the performance of saw device in high frequency . so it is important that second order effects are researched and improved in depth
这样的需求要求了saw设计者考虑在低频时未加考虑的二阶效应,大多数以前的分析假设电极无厚度而忽略了的二阶效应（电磁直通、三次行程干扰、体声波、声电再生等）在高频时对saw器件的性能影响较大，要求对其二阶效应进行深入研究并对其进行改善。 |
| 8. | As the technology entered the era of deep - submicron ( dsm ) technologies , the second order effects of cmos device are having more and more influence on the performance of the cmos logic circuits . this dissertation compared the performance of four popular logic families against mcml under dsm technology
随着工艺发展进入深亚微米时代， cmos器件的二阶效应对电路的性能产生着越来越重要的影响，论文首先对比讨论了mcml电路和其它各种常用逻辑电路在采用深亚微米器件时的性能表现。 |
| 9. | A curved beam element is proposed for the elastic and elasto - plastic large - displacement analysis of thin - walled curved beams based on the new developed nonlinear theory . using polynomial displacement functions , the proposed element includes the second order effect associated with geometric and material nonlinearities
基于新的曲梁非线性理论，提出了一种以多项式作为位移模式，可以同时考虑几何和材料非线性的薄壁曲梁单元，用于曲梁的弹性和弹塑性问题分析，并编制了相应的有限元程序。 |
